Tuesday, November 10, 2009

Steps to setup an Industry in Gujarat

Establishing an Industrial Project

Steps to be followed by an entrepreneur

  • Collect maximum information about  the project or products proposed to be manufactured
  • For the purpose, collect/prepare a project profile which would outline brief information on the project or products to be manufactured
  • Decide location where the project is likely to set up
  • Learn about the procedures and formalities required to be completed before taking up physical implementation of the project

Get a detailed project report prepared which interalia should include following components

  • Market potential of the products to be manufactured
  • Characteristics of the Location
  • Land and building requirements
  • Requirements and availability of Plant and Machinery
  • Requirement of other utilities namely power, water, steam etc.
  • Assessment of Working Capital requirements
  • Technology tie-up
  • Raw materials with specifications
  • Manpower requirements
  • Schedule of Implementation
  • Estimates of Project Cost
  • Tie up of means of finance
  • Cost of Production and  profitability
  • Break even Point
  • Internal Rate of Return
  • Cash flow
  • Debt service Coverage Ratio to establish financial viability
  • Economic Benefits

Steps to setup an Industry in Gujarat

Establishing an Industrial Project

Steps to be followed by an entrepreneur

  • Collect maximum information about  the project or products proposed to be manufactured
  • For the purpose, collect/prepare a project profile which would outline brief information on the project or products to be manufactured
  • Decide location where the project is likely to set up
  • Learn about the procedures and formalities required to be completed before taking up physical implementation of the project

Get a detailed project report prepared which interalia should include following components

  • Market potential of the products to be manufactured
  • Characteristics of the Location
  • Land and building requirements
  • Requirements and availability of Plant and Machinery
  • Requirement of other utilities namely power, water, steam etc.
  • Assessment of Working Capital requirements
  • Technology tie-up
  • Raw materials with specifications
  • Manpower requirements
  • Schedule of Implementation
  • Estimates of Project Cost
  • Tie up of means of finance
  • Cost of Production and  profitability
  • Break even Point
  • Internal Rate of Return
  • Cash flow
  • Debt service Coverage Ratio to establish financial viability
  • Economic Benefits

Steps to setup an Industry in Gujarat

Establishing an Industrial Project

Steps to be followed by an entrepreneur

  • Collect maximum information about  the project or products proposed to be manufactured
  • For the purpose, collect/prepare a project profile which would outline brief information on the project or products to be manufactured
  • Decide location where the project is likely to set up
  • Learn about the procedures and formalities required to be completed before taking up physical implementation of the project

Get a detailed project report prepared which interalia should include following components

  • Market potential of the products to be manufactured
  • Characteristics of the Location
  • Land and building requirements
  • Requirements and availability of Plant and Machinery
  • Requirement of other utilities namely power, water, steam etc.
  • Assessment of Working Capital requirements
  • Technology tie-up
  • Raw materials with specifications
  • Manpower requirements
  • Schedule of Implementation
  • Estimates of Project Cost
  • Tie up of means of finance
  • Cost of Production and  profitability
  • Break even Point
  • Internal Rate of Return
  • Cash flow
  • Debt service Coverage Ratio to establish financial viability
  • Economic Benefits

Steps to setup an Industry in Gujarat

Establishing an Industrial Project

Steps to be followed by an entrepreneur

  • Collect maximum information about  the project or products proposed to be manufactured
  • For the purpose, collect/prepare a project profile which would outline brief information on the project or products to be manufactured
  • Decide location where the project is likely to set up
  • Learn about the procedures and formalities required to be completed before taking up physical implementation of the project

Get a detailed project report prepared which interalia should include following components

  • Market potential of the products to be manufactured
  • Characteristics of the Location
  • Land and building requirements
  • Requirements and availability of Plant and Machinery
  • Requirement of other utilities namely power, water, steam etc.
  • Assessment of Working Capital requirements
  • Technology tie-up
  • Raw materials with specifications
  • Manpower requirements
  • Schedule of Implementation
  • Estimates of Project Cost
  • Tie up of means of finance
  • Cost of Production and  profitability
  • Break even Point
  • Internal Rate of Return
  • Cash flow
  • Debt service Coverage Ratio to establish financial viability
  • Economic Benefits

Saturday, August 22, 2009

Laghu Udyog registration - SSI Registration

We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration and Laghu Udyog Registration.

These units can get good benefits in ISO reimbursement, Export, etc.. from SSI Registration or MSME Registration or SISI Registration or Laghu Udyog in Ahmedabad, Gujarat, India. .

Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India
Laghu Udyog Registration in Ahmedabad

SSI Registration - Laghu Udyog Registration - MSMED Registration

We are providing services for Laghu Udyog, Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration and.

These units can get good benefits in ISO reimbursement, Export, etc.. from SSI Registration or MSME Registration or SISI Registration or Laghu Udyog in Ahmedabad, Gujarat, India. .

Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India
Laghu Udyog Registration in Ahmedabad

SSI Registration - Laghu Udyog Registration - MSMED Registration

We are providing services for Laghu Udyog, Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration and.

These units can get good benefits in ISO reimbursement, Export, etc.. from SSI Registration or MSME Registration or SISI Registration or Laghu Udyog in Ahmedabad, Gujarat, India. .

Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India
Laghu Udyog Registration in Ahmedabad

SSI Registration - MSME Registration - Laghu Udyog Registration

We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration and Laghu Udyog.

These units can get good benefits in ISO reimbursement, Export, etc.. from SSI Registration or MSME Registration or SISI Registration or Laghu Udyog in Ahmedabad, Gujarat, India. .

Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India
Laghu Udyog Registration in Ahmedabad

Monday, August 3, 2009

Ministry of MSME

  • Programmes & Schemes of the Ministry of MSME

  • Scheme for International Cooperation
    Scheme of Surveys, Studies and Policy Research
    Entrepreneurship Development Institution Scheme
    Prime Minister's Rozgar yojna (PMRY)
    Scheme of fund for Regeneration of Traditional Industries (SFURTI)
    Rural Employment Generation Programme (REGP)
    Product Development, Design Intervention and Packaging (PRODIP)
    Khadi Kairgar Janashree Bima Yojana for Khadi Artisans
    Interest Subsidy Eligibility Certification (ISEC)

    Ministry of MSME

  • Programmes & Schemes of the Ministry of MSME

  • Scheme for International Cooperation
    Scheme of Surveys, Studies and Policy Research
    Entrepreneurship Development Institution Scheme
    Prime Minister's Rozgar yojna (PMRY)
    Scheme of fund for Regeneration of Traditional Industries (SFURTI)
    Rural Employment Generation Programme (REGP)
    Product Development, Design Intervention and Packaging (PRODIP)
    Khadi Kairgar Janashree Bima Yojana for Khadi Artisans
    Interest Subsidy Eligibility Certification (ISEC)

    Support for Entrepreneurial and Managerial Development of SMEs through Incubators

    Details of Scheme for "Support for Entrepreneurial and Management Development of SMEs through Incubators"

  • Guidelines of the Incubators Scheme - Under this scheme, 100"Business Incubators" (BIs) are to be set up under Technology (Host) Institutions over the next 4 years [@ say 25 per year] and each BI is expected to help the incubation of about 10 new ideas or units.   

  • Contact Details of 25 Approved Host Institutions/Business Incubators under the Scheme- The contact details of 25 Host Institutions which has been approved for the year 2008-2009 is given.

  • Proforma for Submission of Proposal by the Incubatees- Any individual/Micro & Small enterprises having innovative business idea which need further trial and/or prototyping before going for commercial production may fill up this form and contact any of the above institutions.

  • Proforma for Submission of Proposal by the Technical/Management Institutions, Universities etc- Any Technical/Management Institutions, Universities etc who wish to participate in this scheme may fill up this form and forward to 'The Development Commissioner(MSME), Ministry of MSME, Govt of India, 7th Floor, Nirman Bhawan, New Delhi-110108.
  • Support for Entrepreneurial and Managerial Development of SMEs through Incubators

    Details of Scheme for "Support for Entrepreneurial and Management Development of SMEs through Incubators"

  • Guidelines of the Incubators Scheme - Under this scheme, 100"Business Incubators" (BIs) are to be set up under Technology (Host) Institutions over the next 4 years [@ say 25 per year] and each BI is expected to help the incubation of about 10 new ideas or units.   

  • Contact Details of 25 Approved Host Institutions/Business Incubators under the Scheme- The contact details of 25 Host Institutions which has been approved for the year 2008-2009 is given.

  • Proforma for Submission of Proposal by the Incubatees- Any individual/Micro & Small enterprises having innovative business idea which need further trial and/or prototyping before going for commercial production may fill up this form and contact any of the above institutions.

  • Proforma for Submission of Proposal by the Technical/Management Institutions, Universities etc- Any Technical/Management Institutions, Universities etc who wish to participate in this scheme may fill up this form and forward to 'The Development Commissioner(MSME), Ministry of MSME, Govt of India, 7th Floor, Nirman Bhawan, New Delhi-110108.
  • BRIEF NOTE ON BARCODING

    Bar Coding is a series of parallel vertical lines (bars and space), that can be read by bar code scanners. It is used worldwide as part of product packages, as price tags, carton labels, on invoices even in credit card bills and when it is read by scanners, a wealth of data is made available at the users and when use with GS1.UCC (Global India one Numbering Uniform Code Council Inc. USA) numbering system. The bar code become unique and universal and can be recognized anywhere in the world. Bar coding is an international concept today. It facilitates unique product identification through using international symbologies/numbering system, promotes brand image and would enable timely and accurate capture of product information. This would result in wide ranging benefits including lowering of inventory costs, lower overall supply chain costs and hence reduced costs for Indian products, increasing efficiency of Indian industry and adherence to stringent quality assurance norms through product traceability.

         For Micro and Small manufacturing enterprise which have resource constraints but need to compete for global and domestic business opportunities with larger adoption of IT tools to enhance their efficiency and productivity, market accessibility and cost effectiveness is a business imperative today. Bar coding has been in use extensively for the past 25 years worldwide and is now finding increase usage as well across industry sector. Recognised the importance of bar coding O/o DC (MSME), Ministry of Micro, Small and Medium Enterprises, Govt. of India has notified an attractive financial assistance scheme for registered Micro and Small manufacturing enterprise vide their notification No.10(6)/2000-EP&M dt.27th Nov., 2001 for adoption of international numbering systems in bar coding and E-commerce applications w.e.f. Ist January 2002. As per the scheme Micro and Small manufacturing enterprise, who have adopted bar code on or after Ist January, 2002 are now eligible to get the financial assistance 75% (upto Rs.18,750/-) of the one time registration fee paid to GS1 India. Further, it was also decided that SSI/tiny units who got registered for bar coding during the previous year i.e. on or after 01.1.01 will also be eligible for reimbursement of 75% of their one time registration fee.

         The scope of the present scheme has been enhanced w.e.f. 1st June 2007. Accordingly, it has been decided that 75% (Rs. 3750/-) of the annual fee (recurring) for GS1 company prefix by GS1 India for adoption of bar code certification for the first three years would also be reimbursed to Micro and Small entrepreneurs, in addition to reimbursement of one time registration fee as charged by GS1 (formerly EAN India)

         To obtain financial assistance on bar code certification, Small and Micro manufacturing enterprises may apply application to Dy. Director (MA) office of the Development Commissioner (MSME) Room No-734, 7th floor Nirman Bhawan New Delhi-110011, with Form VI and Annexure I, II, IIIA,IIIB, & IV:

         The detailed of scheme with the relevant registration forms are available on our website at: www.smallindustryindia.com or www.laghu-udyog.com or www.dcmsme.gov.in and also at GS1 India's website www.gs1india.org . All the Micro and Small manufacturing enterprise who have adopted bar code certificates, are advised to apply for it at the earliest and avail of this financial assistance.

    BRIEF NOTE ON BARCODING

    Bar Coding is a series of parallel vertical lines (bars and space), that can be read by bar code scanners. It is used worldwide as part of product packages, as price tags, carton labels, on invoices even in credit card bills and when it is read by scanners, a wealth of data is made available at the users and when use with GS1.UCC (Global India one Numbering Uniform Code Council Inc. USA) numbering system. The bar code become unique and universal and can be recognized anywhere in the world. Bar coding is an international concept today. It facilitates unique product identification through using international symbologies/numbering system, promotes brand image and would enable timely and accurate capture of product information. This would result in wide ranging benefits including lowering of inventory costs, lower overall supply chain costs and hence reduced costs for Indian products, increasing efficiency of Indian industry and adherence to stringent quality assurance norms through product traceability.

         For Micro and Small manufacturing enterprise which have resource constraints but need to compete for global and domestic business opportunities with larger adoption of IT tools to enhance their efficiency and productivity, market accessibility and cost effectiveness is a business imperative today. Bar coding has been in use extensively for the past 25 years worldwide and is now finding increase usage as well across industry sector. Recognised the importance of bar coding O/o DC (MSME), Ministry of Micro, Small and Medium Enterprises, Govt. of India has notified an attractive financial assistance scheme for registered Micro and Small manufacturing enterprise vide their notification No.10(6)/2000-EP&M dt.27th Nov., 2001 for adoption of international numbering systems in bar coding and E-commerce applications w.e.f. Ist January 2002. As per the scheme Micro and Small manufacturing enterprise, who have adopted bar code on or after Ist January, 2002 are now eligible to get the financial assistance 75% (upto Rs.18,750/-) of the one time registration fee paid to GS1 India. Further, it was also decided that SSI/tiny units who got registered for bar coding during the previous year i.e. on or after 01.1.01 will also be eligible for reimbursement of 75% of their one time registration fee.

         The scope of the present scheme has been enhanced w.e.f. 1st June 2007. Accordingly, it has been decided that 75% (Rs. 3750/-) of the annual fee (recurring) for GS1 company prefix by GS1 India for adoption of bar code certification for the first three years would also be reimbursed to Micro and Small entrepreneurs, in addition to reimbursement of one time registration fee as charged by GS1 (formerly EAN India)

         To obtain financial assistance on bar code certification, Small and Micro manufacturing enterprises may apply application to Dy. Director (MA) office of the Development Commissioner (MSME) Room No-734, 7th floor Nirman Bhawan New Delhi-110011, with Form VI and Annexure I, II, IIIA,IIIB, & IV:

         The detailed of scheme with the relevant registration forms are available on our website at: www.smallindustryindia.com or www.laghu-udyog.com or www.dcmsme.gov.in and also at GS1 India's website www.gs1india.org . All the Micro and Small manufacturing enterprise who have adopted bar code certificates, are advised to apply for it at the earliest and avail of this financial assistance.

    Credit Guarantee Fund Scheme for MICRO AND SMALL ENTERPRISES

    Introduction

                        There are an estimated 13.4 million micro and small enterprises (MSEs) in the country at the end of March 2008, providing employment to an estimated 32.3 million persons. The MSE sector contributes about 39% of the manufacturing sector output and 33% of the nation's exports. Of all the problems faced by the MSEs, non-availability of timely and adequate credit at reasonable interest rate is one of the most important. One of the major causes for low availability of bank finance to this sector is the high risk perception of the banks in lending to MSEs and consequent insistence on collaterals which are not easily available with these enterprises. The problem is more serious for micro enterprises requiring small loans and the first generation entrepreneurs.
    2. The Credit Guarantee Fund Scheme for Micro and Small Enterprises (CGMSE) was launched by the Government of India to make available collateral-free credit to the micro and small enterprise sector. Both the existing and the new enterprises are eligible to be covered under the scheme. The Ministry of Micro, Small and Medium Enterprises and Small Industries Development Bank of India (SIDBI), established a Trust named Credit Guarantee Fund Trust for Micro and Small Enterprises (CGTMSE) to implement the Credit Guarantee Fund Scheme for Micro and Small Enterprises. The scheme was formally launched on August 30, 2000 and is operational with effect from 1st January 2000. The corpus of CGTMSE is being contributed by the Government and SIDBI in the ratio of 4:1 respectively and has contributed Rs.1584.05 crore to the corpus of the Trust up to June 30, 2008. As announced in the Package for MSEs, the corpus is to be raised to Rs.2500 crore by the end of 11th Plan.


    Eligible Lending Institutions

    3. The institutions, which are eligible under the scheme, are scheduled commercial banks (Public Sector Banks/Private Sector Banks/Foreign Banks) and select Regional Rural Banks (which have been classified under 'Sustainable Viable' category by NABARD). National Small Industries Corporation Ltd. (NSIC), North Eastern Development Finance Corporation Ltd. (NEDFi) and SIDBI have also been made eligible institutions. As on June 30, 2008, there are 65 Member Lending Institutions (MLIs) of the Trust, comprising 28 Public Sector Banks, 14 Private Sector Banks, 20 Regional Rural Banks and 3 other Institutions viz., NSIC, NEDFI and SIDBI.

    Eligible Credit Facility

    4. The credit facilities which are eligible to be covered under the scheme are both term loans and working capital facility up to Rs.50 lakh per borrowing unit, extended without any collateral security or third party guarantee, to a new or existing micro and small enterprise. For those units covered under the guarantee scheme, which may become sick owing to factors beyond the control of management, rehabilitation assistance extended by the lender could also be covered under the guarantee scheme. It is noteworthy that if the credit facility exceeds Rs.50 lakh, it may still be covered under the scheme but the guarantee cover will be extended for credit assistance of Rs.50 lakh only. Another important requirement under the scheme is that the credit facility should be availed by the borrowing unit from a single lending institution. However, the unit already assisted by the State Level Institution/NSIC/NEDFi can be covered under the scheme for the credit facility availed from member bank, subject to fulfillment of other eligibility criteria. Any credit facility in respect of which risks are additionally covered under a scheme, operated by Government or other agencies, will not be eligible for coverage under the scheme.

    Guarantee Cover

    5. The guarantee cover available under the scheme is to the extent of 75 per cent of the sanctioned amount of the credit facility. The extent of guarantee cover is 80 per cent for (i) micro enterprises for loans up to Rs.5 lakh; (ii) MSEs operated and/or owned by women; and (iii) all loans in the North-East Region. In case of default, Trust settles the claim up to 75% (or 80% wherever applicable) of the amount in default of the credit facility extended by the lending institution. For this purpose the amount in default is reckoned as the principal amount outstanding in the account of the borrower, in respect of term loan, and amount of outstanding working capital facilities, including interest, as on the date of the account turning Non-Performing Asset (NPA).

    Tenure of Guarantee

    6. The Guarantee cover under the scheme is for the agreed tenure of the term loan/composite credit. In case of working capital, the guarantee cover is of 5 years or block of 5 years.

    Fee for Guarantee

    Credit Guarantee Fund Scheme for MICRO AND SMALL ENTERPRISES

    Introduction

                        There are an estimated 13.4 million micro and small enterprises (MSEs) in the country at the end of March 2008, providing employment to an estimated 32.3 million persons. The MSE sector contributes about 39% of the manufacturing sector output and 33% of the nation's exports. Of all the problems faced by the MSEs, non-availability of timely and adequate credit at reasonable interest rate is one of the most important. One of the major causes for low availability of bank finance to this sector is the high risk perception of the banks in lending to MSEs and consequent insistence on collaterals which are not easily available with these enterprises. The problem is more serious for micro enterprises requiring small loans and the first generation entrepreneurs.
    2. The Credit Guarantee Fund Scheme for Micro and Small Enterprises (CGMSE) was launched by the Government of India to make available collateral-free credit to the micro and small enterprise sector. Both the existing and the new enterprises are eligible to be covered under the scheme. The Ministry of Micro, Small and Medium Enterprises and Small Industries Development Bank of India (SIDBI), established a Trust named Credit Guarantee Fund Trust for Micro and Small Enterprises (CGTMSE) to implement the Credit Guarantee Fund Scheme for Micro and Small Enterprises. The scheme was formally launched on August 30, 2000 and is operational with effect from 1st January 2000. The corpus of CGTMSE is being contributed by the Government and SIDBI in the ratio of 4:1 respectively and has contributed Rs.1584.05 crore to the corpus of the Trust up to June 30, 2008. As announced in the Package for MSEs, the corpus is to be raised to Rs.2500 crore by the end of 11th Plan.


    Eligible Lending Institutions

    3. The institutions, which are eligible under the scheme, are scheduled commercial banks (Public Sector Banks/Private Sector Banks/Foreign Banks) and select Regional Rural Banks (which have been classified under 'Sustainable Viable' category by NABARD). National Small Industries Corporation Ltd. (NSIC), North Eastern Development Finance Corporation Ltd. (NEDFi) and SIDBI have also been made eligible institutions. As on June 30, 2008, there are 65 Member Lending Institutions (MLIs) of the Trust, comprising 28 Public Sector Banks, 14 Private Sector Banks, 20 Regional Rural Banks and 3 other Institutions viz., NSIC, NEDFI and SIDBI.

    Eligible Credit Facility

    4. The credit facilities which are eligible to be covered under the scheme are both term loans and working capital facility up to Rs.50 lakh per borrowing unit, extended without any collateral security or third party guarantee, to a new or existing micro and small enterprise. For those units covered under the guarantee scheme, which may become sick owing to factors beyond the control of management, rehabilitation assistance extended by the lender could also be covered under the guarantee scheme. It is noteworthy that if the credit facility exceeds Rs.50 lakh, it may still be covered under the scheme but the guarantee cover will be extended for credit assistance of Rs.50 lakh only. Another important requirement under the scheme is that the credit facility should be availed by the borrowing unit from a single lending institution. However, the unit already assisted by the State Level Institution/NSIC/NEDFi can be covered under the scheme for the credit facility availed from member bank, subject to fulfillment of other eligibility criteria. Any credit facility in respect of which risks are additionally covered under a scheme, operated by Government or other agencies, will not be eligible for coverage under the scheme.

    Guarantee Cover

    5. The guarantee cover available under the scheme is to the extent of 75 per cent of the sanctioned amount of the credit facility. The extent of guarantee cover is 80 per cent for (i) micro enterprises for loans up to Rs.5 lakh; (ii) MSEs operated and/or owned by women; and (iii) all loans in the North-East Region. In case of default, Trust settles the claim up to 75% (or 80% wherever applicable) of the amount in default of the credit facility extended by the lending institution. For this purpose the amount in default is reckoned as the principal amount outstanding in the account of the borrower, in respect of term loan, and amount of outstanding working capital facilities, including interest, as on the date of the account turning Non-Performing Asset (NPA).

    Tenure of Guarantee

    6. The Guarantee cover under the scheme is for the agreed tenure of the term loan/composite credit. In case of working capital, the guarantee cover is of 5 years or block of 5 years.

    Fee for Guarantee

    For registered Small & Micro manufacturing enterprises with DI/DIC

    This is administered through the Single Point Registration Scheme of NSIC. Under this, 358 items are reserved for exclusive purchase from MSME by Central Government. Other facilities include tender documents free of cost, exemption from earnest money and security deposit and 15% price preference in Central Government purchases - for individual MSMEs

    For registered Small & Micro manufacturing enterprises with DI/DIC

    This is administered through the Single Point Registration Scheme of NSIC. Under this, 358 items are reserved for exclusive purchase from MSME by Central Government. Other facilities include tender documents free of cost, exemption from earnest money and security deposit and 15% price preference in Central Government purchases - for individual MSMEs

    NATIONAL MANUFACTURING COMPETITIVENESS PROGRAMME (NMCP) UNDER XI PLAN

    S.No.
    Name of the Scheme
    Status of Scheme
    1
    2
    3
    4
    5
    National Programme on Application on Lean Manufacturing(LEAN)
    6
    Mini Tool Rooms proposed to be set up by Ministry of MSME (MTR)
    7
    8
    9
    10


    SSI Registration | SSI Registration in Ahmedabad | MSME India

    NATIONAL MANUFACTURING COMPETITIVENESS PROGRAMME (NMCP) UNDER XI PLAN

    S.No.
    Name of the Scheme
    Status of Scheme
    1
    2
    3
    4
    5
    National Programme on Application on Lean Manufacturing(LEAN)
    6
    Mini Tool Rooms proposed to be set up by Ministry of MSME (MTR)
    7
    8
    9
    10


    SSI Registration | SSI Registration in Ahmedabad | MSME India

    Message from the Industries Commissioner

    Gujarat has always been in the forefront of industrial development in India and has successfully emerged as one of the most investor friendly destinations in the country. 
     
    Gujarat has progressed to become India's premier industrial state and accounts for the highest share of investments (16%) among all states in India.  In the past 5 years, Gujarat had attracted investments totaling Rs. 94,400 crores, again the highest among all states in India.
     
    The near future promises to have its share of challenges and opportunities for Gujarat as it continues its dominance as India's most industrialized state. On behalf of the Government of Gujarat, I welcome the industry to tap investment opportunities in the manufacturing and service sectors as well as infrastructure projects in the State of Gujarat.

    Shri Sujit Gulati, IAS
    Industries Commissioner

    Message from the Industries Commissioner

    Gujarat has always been in the forefront of industrial development in India and has successfully emerged as one of the most investor friendly destinations in the country. 
     
    Gujarat has progressed to become India's premier industrial state and accounts for the highest share of investments (16%) among all states in India.  In the past 5 years, Gujarat had attracted investments totaling Rs. 94,400 crores, again the highest among all states in India.
     
    The near future promises to have its share of challenges and opportunities for Gujarat as it continues its dominance as India's most industrialized state. On behalf of the Government of Gujarat, I welcome the industry to tap investment opportunities in the manufacturing and service sectors as well as infrastructure projects in the State of Gujarat.

    Shri Sujit Gulati, IAS
    Industries Commissioner

    Message from the Industries Commissioner

    Gujarat has always been in the forefront of industrial development in India and has successfully emerged as one of the most investor friendly destinations in the country. 
     
    Gujarat has progressed to become India's premier industrial state and accounts for the highest share of investments (16%) among all states in India.  In the past 5 years, Gujarat had attracted investments totaling Rs. 94,400 crores, again the highest among all states in India.
     
    The near future promises to have its share of challenges and opportunities for Gujarat as it continues its dominance as India's most industrialized state. On behalf of the Government of Gujarat, I welcome the industry to tap investment opportunities in the manufacturing and service sectors as well as infrastructure projects in the State of Gujarat.

    Shri Sujit Gulati, IAS
    Industries Commissioner

    Friday, July 17, 2009

    SSI Registration in Ahmedabad

    We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration.

    These units can get good benefits from SSI Registration or MSME Registration or SISI Registration in Ahmedabad, Gujarat, India.  .

    Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


    Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

    SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
    MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India


    SSI Units in Ahmedabad SSI Units in Gujarat SSI Units in India

    SSI Registration in Ahmedabad

    We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration.

    These units can get good benefits from SSI Registration or MSME Registration or SISI Registration in Ahmedabad, Gujarat, India.  .

    Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


    Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

    SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
    MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India


    SSI Units in Ahmedabad SSI Units in Gujarat SSI Units in India

    SSI Registration in India

    We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration.

    These units can get good benefits from SSI Registration or MSME Registration or SISI Registration in Ahmedabad, Gujarat, India.  .

    Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


    Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

    SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
    MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India


    SSI Registration in India

    We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration.

    These units can get good benefits from SSI Registration or MSME Registration or SISI Registration in Ahmedabad, Gujarat, India.  .

    Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


    Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

    SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
    MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India


    SSI Registration in India

    We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration and Laghu Udyog.

    These units can get good benefits in ISO reimbursement, Export, etc.. from SSI Registration or MSME Registration or SISI Registration or Laghu Udyog in Ahmedabad, Gujarat, India. .

    Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


    Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

    SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
    MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India
    Laghu Udyog Registration in Ahmedabad

    SSI Registration in India

    We are providing services for Small Scale Industry ( SSI Unit ) and Micro Small Medium Enterprises ( MSME ) for there registration.

    These units can get good benefits from SSI Registration or MSME Registration or SISI Registration in Ahmedabad, Gujarat, India.  .

    Feel free to contact us Mobile : 9374745450 or email us ekdantcons@gmail.com


    Visit us at SSI REGISTRATION IN INDIA or MSME REGISTRATION IN INDIA

    SSI Registration in Ahmedabad, SSI Registration in Gujarat, SSI Registration in India
    MSMED Registration in Ahmedabad, MSMED Registration in Gujarat, MSMED Registration in India

    Wednesday, April 29, 2009

    DIC Registration

    DIC Registration.
    Distict Industries Center

    Friday, April 10, 2009

    Thursday, April 9, 2009

    DE-REGISTRATION

    A Micro, small and medium Enterprises can violate the regulations in the following ways which will make it liable for de-registration:
    • It crosses the investment limits.
    • It starts manufacturing any new item or items that require an industrial license or other kind of statutory license.
    • It does not satisfy the condition of being owned, controlled or being a subsidiary of any other industrial undertaking.

    DE-REGISTRATION

    A Micro, small and medium Enterprises can violate the regulations in the following ways which will make it liable for de-registration:
    • It crosses the investment limits.
    • It starts manufacturing any new item or items that require an industrial license or other kind of statutory license.
    • It does not satisfy the condition of being owned, controlled or being a subsidiary of any other industrial undertaking.